1746-P2 New Allen Bradley Power Supply [1746-P2] - $263.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: 1746-P2

Model: Power Supply

Manufacturer: Allen Bradley

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Specifications:

Model		1746-P2
Line voltage		85...132/170...265V ac 47...63 Hz
Typical line power requirement		180VA
Inrush current, max		20 A
Internal current capacity		5 A at 5V dc 0.96 A at 24V dc
Fuse protection⁽¹⁾		1746-F2 or equivalent⁽²⁾⁽³⁾
24V dc user-power current capacity		200 mA
24V dc user-power voltage range		18..30V dc
User-supplied overcurrent protection⁽⁴⁾, max		15 A
Temperature, ambient operating		0...60??C (32...140??F) Current capacity is derated 5% above 55??C (131 ?F).
Isolation⁽⁵⁾		1800V ac RMS for 1 s
CPU hold-up time⁽⁶⁾		20 ms (full load) 3000 ms (no load)
Certification (when product is marked)		UL Listed Industrial Control Equipment for Class 1, Division 2, Groups A, B, C, D Hazardous Locations
		C-UL Listed Industrial Control Equipment for Class 1, Division 2, Groups A, B, C, D Hazardous Locations
		CE⁽⁷⁾ European Union 89/336/EEC EMC Directive, compliant with: EN 50082-2 Industrial Immunity EN50081-2 Industrial Emissions European Union 73/23/EEC LVD Directive, compliant with: EN61131-2 Programmable Controllers
		C-Tick Australian Radiocommunications Act, compliant with: AS/NZS 2064 Industrial Emissions

Power supply fuse is intended to guard against fire hazard due to short-circuit conditions. This fuse may not protect the supply from miswiring or excessive transient in the power line.
Fuse sizes specified are for end-devices only. Fuse size may need to be reduced depending on the size of circuit wiring.
Equivalent fuse: 250V-3A fuse, SANO SOC SD4, or BUSSMAN AGC 3.
Use time-delay type overcurrent protection in all ungrounded conductors.
Isolation is between input terminals and backplane.
CPU hold-up time is for 0V unless specified. Hold-up time is dependent on power supply loading.
See the Product Certification link at http://ab.com for Declarations of Conformity, Certificates, and other certification details.