1746-P4 New Allen Bradley 1746 Power Supply SLC 500 Series [1746-P4] - $646.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: 1746-P4

Model: Power Supply SLC 500 Series

Manufacturer: Allen Bradley

Description

Model		1746-P4
Line voltage		85...132/170...250V ac 47...63 Hz
Typical line power requirement		150VA
Inrush current, max		45 A
Internal current capacity		10.0 A at 5V dc 2.88 A at 24V dc⁽¹⁾
Fuse protection⁽²⁾		Fuse is soldered in place.
24V dc user-power current capacity		1 A⁽¹⁾
24V dc user-power voltage range		20.4...27.6V dc
User-supplied overcurrent protection⁽³⁾, max		15 A
Temperature, ambient operating		0...60 ?C (32...140 ?F) No derating
Isolation⁽⁴⁾		2600V dc for 1 s
CPU hold-up time⁽⁵⁾		20 ms (full load) 3000 ms (no load)
Certification (when product is marked)		UL Listed Industrial Control Equipment
		CSA Certified Process Control Equipment for Class 1, Division 2, Groups A, B, C, D Hazardous Locations
		CE⁽⁶⁾ European Union 89/336/EEC EMC Directive, compliant with: EN 50082-2 Industrial Immunity EN50081-2 Industrial Emissions European Union 73/23/EEC LVD Directive, compliant with: EN61131-2 Programmable Controllers
		C-Tick Australian Radiocommunications Act, compliant with: AS/NZS 2064 Industrial Emissions

The combination of all output power (5V backplane, 24V backplane, and 24V user source) cannot exceed 70 W.
Power supply fuse is intended to guard against fire hazard due to short-circuit conditions. This fuse may not protect the supply from miswiring or excessive transient in the power line.
Use time-delay type overcurrent protection in all ungrounded conductors.
Isolation is between input terminals and backplane.
CPU hold-up time is for 0V unless specified. Hold-up time is dependent on power supply loading.
See the Product Certification link at http://ab.com for Declarations of Conformity, Certificates, and other certification details.