Product Description
Part Number: 1769-OF2
Model: 1769 Compact Analog I/O Module
Manufacturer: Allen Bradley
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
| Model | 1769-OF2 | |
| Outputs | single-ended | |
| Output range | 10V; 0 10V; 0 5V; 1 5V; 0 20 mA; 4 20 mA | |
Full scale range(1) | 10.5V; -0.5 10.5V; -0.5 5.25V; 0.5 5.25V; 0 21 mA; 3.2 21 mA | |
| Resolution | 14 bits (unipolar) 14 bits plus sign (bipolar) 10V DC: sign + 14 bits, 0.64 mV 0 10V DC: sign + 13 bits, 0.64 mV 0 5V DC: sign + 14 bits, 0.64 mV 1 5V DC: sign + 14 bits, 1.28 ?A 0 20 mA: sign + 13 bits, 0.64 mV 4 20 mA: sign + 14 bits, 1.28 ?A | |
Current draw @ 5.1V | 120 mA | |
| Current draw @ 24V | 120 mA | |
Converter type | Delta Sigma | |
| Heat dissipation, max | 2.63 W | |
| Conversion rate (all channels), max | 2.5 ms | |
Step response to 63%(2) | 2.9 ms | |
| Current load on voltage output, max | 10 mA | |
| Resistive load on current output | 0 500 (includes wire resistance) | |
Load range on voltage output | > 1k @ 10V DC | |
| Inductive load (current outputs), max | 0.1 mH | |
| Capacitive load (voltage outputs), max | 1 Deg F | |
| Field calibration | None required | |
Accuracy(3) | Voltage: ?0.5% full scale @ 25 ?C (77 ?F) Current: ?0.35% full scale @ 25 ? C (77 ?F) | |
| Accuracy drift with temperature | Voltage: ?0.0086% per ?C Current: ?0.0058% per ?C | |
Output ripple(4) | ?0.05% @ 0 50 kHz | |
| Nonlinearity | ?0.05% | |
Repeatability(5) | ?0.05% | |
| Module error | Voltage: ?0.8% Current: ?0.55% | |
| Offset error | ?0.05% | |
| Output impedance | 15 | |
| Open and short-circuit protection | Yes | |
| Short-circuit protection, max | 21 mA | |
| Output overvoltage protection | Yes | |
| Time to detect open wire condition (current mode) | 10 ms, typical 13.5 ms, max | |
| Output response at system powerup and power down | ?5V DC spike for < 5 ms | |
Rated working voltage(6) | 30V AC/30V DC | |
| Isolation voltage | 500V AC or 710V DC for 1 min (qualification test), output group to bus 30V AC/30V DC working voltage (IEC Class 2 reinforced insulation) | |
| Weight, approx | 300 g (0.65 lb) | |
| Dimensions (HxWxD), approx | 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) Height with mounting tabs 138 mm (5.43 in.) | |
| Slot width | 1 | |
| Module location | DIN rail or panel mount | |
| Power supply | 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 | |
Optional 24V DC Class 2 power supply voltage range(7) | 20.4 26.4V DC | |
| Power supply distance rating | 8 modules | |
| Terminal screw torque | 0.68 N m (6 lb in) | |
| Retaining screw torque | 0.46 N m (4.1 lb in) | |
| Wire size | (22 14 AWG) solid (22 16 AWG) stranded | |
| Wire type | Cu-90 ?C (194 ?F) | |
| Replacement terminal block | 1769-RTBN18 (1 per kit) | |
| Replacement door label | 1769-RL2 (2 per kit) | |
| Replacement door | 1769-RD (2 per kit) | |
| Vendor ID code | 1 | |
| Product type code | 10 | |
| Product code | 32 | |
| Enclosure type rating | None (open style) | |
- The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to convert the analog input up to the maximum full scale range.
The flag automatically resets when within the normal operating range. - Step response is the time between when the D/A converter was instructed to go from minimum to full range until the device is at 63% of full range.
- Includes offset, gain, nonlinearity, and repeatability error terms.
- Output ripple is the amount that a fixed output varies with time, which assumes a constant load and temperature.
- Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.
- Rated working voltage is the maximum continuous voltage that can be applied at the input terminal, including the input signal and the value that floats above ground potential.
For example, a 10V DC input signal and 20V DC potential above ground at the input terminal. - If the optional 24V DC Class 2 power supply is used, the 24V DC current draw from the bus is 0 mA.
- Availability: In Stock
- Estimated Lead Time: Usually Ships in 1 - 7 Working Days
- Shipping Weight: 2 Kg
Your Can Likes
- 51454470-275 New Honeywell Analog Input Module
- $2,091.00 $1,025.00
Save: 51% off
- 6ES7952-1KL00-0AA0 New Siemens SIMATIC S7 Memory Card
- $751.00 $447.00
Save: 40% off
- 6ES7322-5HF00-0AB0 New Siemens Digital Output SM 322
- $329.00 $195.00
Save: 41% off
- ACM12 New Yokogawa RS-422/RS-485 Communication Module - Obsolete
- $4,606.00 $2,257.00
Save: 51% off




