English
$
Contact Us

Product 665/1465

 Previous 
 Return to the Product List 
 Next 
EJA110E-JMS4G-917DB/D4 New Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-JMS4G-917DB/D4 New Yokogawa EJA110E Differential Pressure Transmitter

  • Model: EJA110E-JMS4G-917DB/D4
  • Units in Stock: 7

$1,579.00  $774.00
Save: 51% off

QTY: Unit(s)

Product Description

Part Number: EJA110E-JMS4G-917DB/D4

Model and Suffix Codes
  • Model: EJA110E - Differential pressure transmitter
  • Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
  • Measurement span (capsule): M - 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material?: S
    Cover flange and process connector: ASTM CF-8M?
    Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others)
    Capsule gasket: Teflon-coated 316L SST
    Vent/Drain plug: 316 SST
  • Process connections: 4 - with 1/2 NPT female process connector
  • Bolts and nuts material: G - 316L SST
  • Installation: -9 - Horizontal piping and left side high pressure
  • Amplifier housing: 1 - Cast aluminum alloy
  • Electrical connection: 7 - 1/2 NPT female, two electrical connections and a blind plug5
  • Integral indicator: D - Digital indicator6
  • Mounting bracket: B - 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Calibration Unit7: /D4 - M Calibration (kgf/cm? unit)

NOTE:
The " * " marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Hastelloy C-276 or ASTM N10276.
  5. Material of a blind plug is aluminum alloy or 304 SST.
  6. Not applicable for electrical connection code 0, 5, 7 and 9.
  7. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.

  • Estimated Lead Time: 8 - 10
  • Shipping Weight: 8 Kg

Your Can Likes