English
$
Contact Us

Product 692/1465

 Previous 
 Return to the Product List 
 Next 
EJA110E-JMS5G-92DDJ/KU22/D4/GS/N4 New Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-JMS5G-92DDJ/KU22/D4/GS/N4 New Yokogawa EJA110E Differential Pressure Transmitter

  • Model: EJA110E-JMS5G-92DDJ/KU22/D4/GS/N4
  • Units in Stock: 7

$2,741.00  $1,343.00
Save: 51% off

QTY: Unit(s)

Product Description

Part Number: EJA110E-JMS5G-92DDJ/KU22/D4/GS/N4
Model: EJA110E Differential Pressure Transmitter
Brand: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

EJA110E features include:
  • 0.055% Accuracy (0.04% Accuracy optional)
  • 0.1% Stability per 10 years
  • 90 ms Response Time
  • Exida and TUV SIL 2 / SIL3 Certified
  • MWP 2,300 psi (MWP 3,600 psi option)
  • Local Parameter Setting (LPS)

Ordering Information

Model EJA110E Differential pressure transmitter
Output signal -J 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)(1)
Measurement span (capsule) M 1 to 100 kPa (4 to 400 inH2O)
Wetted parts material(2) S# Cover flange and process connector: ASTM CF-8M(3)(4)
Capsule: Hastelloy C-276(5) (Diaphragm), F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections *5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material G 316L SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 2 ASTM CF-8M stainless steel(6)
Electrical connection D M20 female, two electrical connections and a SUS316 blind plug
Integral indicator D Digital indicator(7)
Mounting bracket J 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
ATEX /KU22 Multiple types of protection (KF22, KS21 or Intrinsically safe Ex ic)(8)(9)
   Applicable Standard: EN IEC 60079-0, EN 60079-11
   II 3 G Ex ic IIC T4 Gc, Amb. Temp.: ?C30 to 60??C (?C22 to 140??F)(10)
   Ui=30 V, Ci=27.6 nF, Li=0 ??H
Calibration unit(11) /D4 M calibration (kgf/cm2 unit)
Gold-plated capsule gasket(12)(13)/GS Gold-plated 316L SST capsule gasket. Without drain and vent plugs.
Wired tag plate /N4 316 SST tag plate wired onto transmitter

The ??*?? marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
    Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Intergranular corrosion test passed according to ASTM A262 Practice E.
  5. Hastelloy C-276 or ASTM N10276.
  6. Only applicable for Wetted parts material code S.
  7. Not applicable for output signal code G.
  8. Applicable for Electrical connection code 2, 4, 7, 9, C and D.
  9. Not applicable for output signal code Q.
  10. Lower limit of temperature is ?C15??C (5??F) when option code HE is specified.
  11. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
  12. Applicable for wetted parts material code S; process connection code 0 and 5; and installation code 8 and 9.
    Not applicable for option code U1, N2, N3 and M11. No PTFE is used for wetted parts.
  13. Not applicable with process connections code for diaphragm seal system B, C, D, E, F, G, Q, R, P and T. 


  • Estimated Lead Time: 12
  • Shipping Weight: 6 Kg

Your Can Likes