EJA530A-EAS7N-02NN/D4 New Yokogawa Gauge Pressure Transmitter [EJA530A-EAS7N-02NN/D4] - $487.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Product Number: EJA530A-EAS7N-02NN/D4

Model: Gauge Pressure Transmitter

Manufacturer: Yokogawa

Ordering Information

Model: EJA530A - Gauge Pressure Transmitter
Output Signal: E - 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
Measurement span (capsule): A - 10 to 200 kPa {0.1 to 2 kgf/cm2} {1.45 to 29 psi} {0.1 to 2 bar}
Wetted Parts Material¹: *S - [Process Connection] SUS316L²; [Diaphragm] Hastelloy C-276³
Process Connection: 7 - 1/2 NPT male
N: Always N
-0: Always 0
Electrical Connection: #2 - 1/2 NPT female, two electrical connections without blind plug
Integral Indicator: #N - (None)
Mounting Bracket: #N - (None)
Optional Codes: /D4 - Calibration Unit⁴- M calibration (kgf/cm2 unit)

The "*" marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
The "#" marks indicate the most typical selection for each specification.

Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user's process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
SUS316L or ASTM grade 316L.
Hastelloy C-276 or ASTM N10276.
The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by Option code D1, D3 and D4.