EJX110A-JMS5G-B19EN/KU22/M01 New Yokogawa EJX110A Differential Pressure Transmitter [EJX110A-JMS5G-B19EN/KU22/M01] - $1,070.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Product Number: EJX110A-JMS5G-B19EN/KU22/M01

Model and Suffix Codes

Model: EJX110A - Gauge Pressure Transmitter
Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
Measurement span (capsule): M - 0.5 to 100 kPa (2 to 400 inH₂O)
Wetted parts material?: S -
Cover flange and process connector: ASTM CF-8M?
Capsule: Hastelloy C-276? (Diaphragm); F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections: *5 - without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material: G - 316L SST
Installation: -B - Bottom Process Connection, left side high pressure⁴
Amplifier housing: 1 - Cast aluminum alloy
Electrical connection: 9 - M20 female, two electrical connections and a blind plug⁵
Integral indicator: E - Digital indicator with the range setting switch (push button)⁶
Mounting bracket: N - None
Optional Codes:
/KU22: ATEX
Combined KF22, KS21 and ATEX Intrinsically safe Ex ic^7,8[ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
II 3G Ex ic IIC T4 Gc, Amb. Temp.: 30 to 60?C ( 22 to 140?F)⁹ Ui=30 V, Ci=27.6 nF, Li=0 H

/M01: Material certificate¹⁰- Cover flange¹¹

NOTE:

The " * " marks indicate the most typical selection for each specification.

Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the users process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Only applicable for Wetted parts material code S.
Material of a blind plug is aluminum alloy or 304 SST.
Not applicable for output signal code F.
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
Not applicable for option code /AL.
Lower limit of ambient temperature is 15?C (5?F) when /HE is specified.
Material traceability certification, per EN 10204 3.1B.
Applicable for process connections codes 0 and 5.