IDP10S-T22B11CA-M1L1B1 New Foxboro Differential Pressure Transmitter [IDP10S-T22B11CA-M1L1B1] - $858.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: IDP10S-T22B11CA-M1L1B1

Model: Differential Pressure Transmitter

Manufacturer: Foxboro

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Model	IDP10S	Differential Pressure Transmitter, Advanced Tier with FoxCal?
Electronics Versions/Output Signal	-T	HART and 4 to 20 mA with SIL 2
Transmitter with Traditional Structure⁽¹⁾	22	316 ss Cover; 316L ss Diaphragm; Silicone Fill; Max Static Pressure=25 MPa (3626 psi)
Span Limits	B	0.12 and 50 kPa; 0.5 and 200 inH₂O; 1.2 and 500 mbar
Process Connector Type (Same Material as the Process Cover)	1	1/4 NPT⁽²⁾⁽³⁾⁽⁴⁾
Conduit Connection and Housing Material	1	1/2 NPT Conduit Connection, Both Sides, Aluminum Housing
Electrical Certifications	CA	CSA intrinsically safe, Zone certified Ex ia
Optional Mounting Bracket Sets⁽⁵⁾⁽⁶⁾	-M1	Standard Style Painted Steel Bracket with Plated Steel Bolts
Options for Digital Indicator with Pushbuttons	-L1	Digital Display, Pushbuttons and Window Cover
Optional Conduit Thread Adapters⁽⁷⁾⁽⁸⁾⁽⁹⁾⁽¹⁰⁾	-B1	316 ss Bolts and Nuts (high corrosion protection; MWP derated to 2175 psi)⁽¹¹⁾

Maximum static pressure can be derated by optional selections.
Not available with Structure codes 78 and 79 (PVDF process covers).
Not available with structures that have seals on both sides.
Not available with structures that have C276 process covers.
Not available with Structure codes F1, F2, F3, and F4 (direct connect seal).
Not available with Low Profile (LP1 and LP2) structures.
Not available with Structure codes 78 and 79 (PVDF process covers).
Not available with optional IEC 61518 Construction codes -D1 through -D9.
For stainless steel bolts with IEC 61518 construction, specify -D5 to -D9, as required, instead of -B1 or -B2.
Not available with structures that have Monel process covers.
See Maximum Static, Overrange, and Proof Pressure Ratings, page 28 for pressure deratings when certain IEC 61518 options and Bolting Options -B1 or -B3 are specified.