ST5484E-121-0132-00 New Metrix Seismic Velocity Transmitter [ST5484E-121-0132-00] - $928.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: ST5484E-121-0132-00

Model: Seismic Velocity Transmitter

Brand: Metrix

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Model	ST5484E	Seismic Velocity 4-20 mA Velocity Transmitter
Full Scale Range⁽¹⁾	121	1.0 in/sec (25.4 mm/s) peak⁽²⁾
Housing Material & Stud Size⁽¹⁾	01	303 SS housing, ??? NPT stud
Hazardous Area Certification^{(3),(4),(5),(6)}	3	ATEX, Ex ia IIC T4 Ga (intrinsically safe)
Connection Type⁽³⁾	2	Terminal Block, 2-wire⁽⁵⁾ ; (4-20 mA output only)
High-Pass Filter	0	2 Hz (standard)
Low-Pass Filter	0	1500 Hz (standard)

Smaller-diameter mounting studs are not able to withstand sustained ambient vibration levels above 2.0 in/sec. Consult Table 2 for allowable combinations of A and B options.
The ST5484E uses an RMS amplitude detection circuit. Full scale ranges in peak units use scaled RMS (i.e., RMS x v2). The ??derived peak?? measurements will equal true peak only under the special case of a pure sinusoid, not complex vibration signals.
Hazardous Area Certifications are not compatible with all connection types. Consult Table 3 for allowable combinations of C & D options.
Some approvals require intrinsic safety barriers, others require Explosion-Proof wiring practices. Refer to Table 4.
Refer to the Accessories section of this document. Units sold with an explosion proof or increased safety rating will include an 8200- 000 IEC or 8200-000 explosion proof elbow that will be affixed at the factory. For increased safety with D=4, elbow is not required.
For SIL approval, add an ??S?? prefix to the desired Hazardous Area Certification (Option C).