English
$
Contact Us

Product 1424/1465

 Previous 
 Return to the Product List 
 Next 
YTA610-JA1A4DD/A/SU2/C2/P2 New Yokogawa YTA610 Temperature Transmitter

YTA610-JA1A4DD/A/SU2/C2/P2 New Yokogawa YTA610 Temperature Transmitter

  • Model: YTA610-JA1A4DD/A/SU2/C2/P2
  • Units in Stock: 7

$1,160.00  $648.00
Save: 44% off

QTY: Unit(s)

Product Description

Part Number: YTA610-JA1A4DD/A/SU2/C2/P2
Model: YTA610 Temperature Transmitter
Manufacturer: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information

Model YTA610 Temperature Transmitter
Output Signal -J 4 to 20 mA DC with digital communication HART protocol
A Always A (Global)
Sensor input 1 Single
Housing code A Aluminum
Electrical connection 4 M20 female
Integral indicator D Digital indicator with Local Operating Switch
Mounting bracket D SUS304 stainless steel 2-inch vertical pipe mounting bracket
Lighting protector1 /A Allowable current: Max. 6000A(8??20??s), repeating 1000A(8??20??s), 100 times
IECEx /SU2 4-20mA:
[Intrinsically safe ia, ic pproval]
   Applicable Standard: IEC 60079-0, IEC 60079-11
   Certificate No. IECEx FMG 16.0014X
   Ex ia IIC T5??T4 Ga
   Ex ic IIC T5...T4 Gc
   Ex ia [ia Da] IIIC T135??C Db
   Ambient Temperature:
       ?C40 to +70??C for T4 (Ex ia), ?C40 to +50??C for T5 (Ex ia), ?C30 to +70??C for IIIC (Ex ia),
      ?C30 to +70??C for T4 (Ex ic), ?C30 to +50??C for T5 (Ex ic)
   Enclosure: IP66/IP67
   Over voltage category: I
   Electrical parameters (Ex ia)
      Supply/Output circuit: Terminal: +, ?C
      Ui=30V, Ii=200mA, Pi=1.0W, Ci=22nF, Li=0mH
      Sensor circuit: Terminals: 1, 2, 3, 4, 5
      Uo=6V, Io=90mA, Po=135mW, Co=10??F, Lo=3.9mH
   Electrical parameters (Ex ic)
      Supply/Output circuit: Terminal: +, ?C
      Ui=30V, Ci=22nF, Li=0mH
      Sensor circuit: Terminals: 1, 2, 3, 4, 5
      Uo=6V, Io=90mA, Po=135mW, Co=10??F, Lo=3.9mH
   Dielectric strength: 500 V a.c.r.m.s.,1 min (Without /A)
[Flameproof and Dust Ignition Proof Approval]
   Applicable standard: IEC 60079-0, IEC 60079-1, IEC 60079-31
   Certificate: IECEx KEM 07.0044X
   Ex db IIC T6/T5 Gb, Ex tb IIIC T70??C/T90??C Db
   Ambient Temperature for Gas Atmospheres: ?C40 to 75??C (?C40 to 167??F) for T6,
      ?C40 to 80??C (?C40 to 176??F) for T5
   Ambient Temperature for Dust Atmospheres: ?C30 to 65??C (?C22 to 149??F) for T70??C,
   ?C30 to 80??C (?C22 to 176??F) for T90??C Enclosure: IP66/IP67
   Electrical Connection: 1/2 NPT female and M20 female2
NAMUR NE43 compliant3 /C2 Output signal limits: 3.8 mA to 20.5 mA
Failure alarm down-scale: output status at CPU failure and hardware error is ?C5%, 3.2 mA or less.
Sensor burnout is also set to Low: ?C2.5%, 3.6 mA DC.
Painting4,5 /P2 Color and coating change Amplifier cover only6

Color: Munsell code 7.5BG4/1.5, Jade green
Coating: High anti-corrosion coating

  1. Lightning protector (surge absorber) can be remove from, or added to the equipment.
  2. Applicable for Electrical Connection Code 2 and 4.
  3. Not applicable for Fieldbus type.
  4. Not applicable for Stainless housing.
  5. The combination of X2 and P? is not possible.
  6. Except for Amplifier and terminal cover, color and coating are general specification.


  • Estimated Lead Time: 25
  • Shipping Weight: 5 Kg

Your Can Likes