1762-IF4 New Allen Bradley MicroLogix Analog Input Module [1762-IF4] - $462.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: 1762-IF4

Type: MicroLogix 4 Point Analog Input Module

Brand: Allen Bradley

General Specifications

Dimensions, HxWxD: 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.)
Approximate shipping weight (with carton): 235 g (8.28 oz)
Bus current draw, max: 40 mA @ 5V DC; 50 mA @ 24V DC
Analog normal operating range: Voltage: -10 10V DC; Current: 4 20 mA
Full scale? analog ranges: Voltage: -10.5 10.5V DC; Current: -21 21 mA
Resolution: 15 bits (bipolar)
Repeatability?: ?0.12%
Input group to system isolation: 30V AC/30V DC rated working voltage? (IEC Class 2 reinforced insulation) type test: 500V AC or 707V DC for 1 min
Module power LED: On: indicates power is applied.
Recommended cable: Belden 8761 (shielded)
Vendor ID code: 1
Product type code: 10
Product code: 67
Wiring category^4:2 - on signal ports
Pilot duty rating: Not rated
Enclosure type rating: IP20
North American temp code: T3C

NOTE:

The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to convert the analog input up to the maximum full scale range.
Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.
Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth ground.
Use this Conductor Category information for planning conductor routing.