1794-AENT New Allen Bradley FLEX I/O Ethernet/IP Adapter [1794-AENT] - $543.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: 1794-AENT

Technical Specifications

I/O capacity: 8 modules
Power supply:
To comply with the CE Low Voltage Directive (LVD), this equipment must be powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
Input voltage rating: 24V dc nom
Input voltage range: 19.2 31.2V dc (includes 5% ac ripple)
Communication rate: 10/100 Mbps
Indicators:
Module Status - red/grn
Network Status - red/grn
Link Status - grn
Flexbus output current: 640 mA max
Isolation voltage:
50V continuous, Basic Insulation Type
Tested at 1000V ac for 60 s, power to Flexbus to EtherNet
Power consumption: 550 mA max, 440 mA max at 24V dc
Power dissipation: 7.3 W max @ 19.2V dc
Thermal dissipation: 24.9 BTU/hr @ 19.2V dc
Ethernet connector: RJ45 Cat. 5
Enclosure type rating: None (open-style)
North American temp code: T4A
Power conductors
Wire size: 0.34 ... 2.5 mm? (22 ... 12 AWG) stranded copper wire rated at 75?C (167?F) or higher, 1.2 mm (3/64 in.) insulation max
Category?: 1 - on power ports; 2 - on communications ports
Thermal screw torque: 0.8 Nm (7 lb-in)
Publications?: User Manual ENET-UM001

You use this category information for planning conductor routing as described in Allen-Bradley Industrial Automation Wiring and Grounding Guidelines.
For additional installation information, refer to ODVA EtherNet/IP Media Planning and Installation Manual.