English
$
Contact Us

Product 1279/1465

 Previous 
 Return to the Product List 
 Next 
STG84L-E1G000-1-C-BHB-11S-B-21A0-FX,F1,02-0000 New Honeywell STG84L Gauge Pressure Transmitter

STG84L-E1G000-1-C-BHB-11S-B-21A0-FX,F1,02-0000 New Honeywell STG84L Gauge Pressure Transmitter

  • Model: STG84L-E1G000-1-C-BHB-11S-B-21A0-FX,F1,02-0000
  • Units in Stock: 7

$1,566.00  $767.00
Save: 51% off

QTY: Unit(s)

Product Description

Part Number: STG84L-E1G000-1-C-BHB-11S-B-21A0-FX,F1,02-0000
Model: Gauge In-Line Pressure Transmitter
Manufacturer: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information

Model STG84L Gauge In-Line Pressure Transmitters
Process Head & Diaphragm Materials E Process Head/ Reference Head Material(1): 316 Stainless Steel / 316 Stainless Steel
Barrier Diaphragm Material:  316L SS
Fill Fluid 1 Silicone Oil 200
Process Connection G Size/Type: 1/2" NPT (female)
Material: Same as Process Head(2)
Bolt/Nuts Materials 0 None
Vent/Drain Type/Location 0 Head Type: None
Vent Type: None
Location: None
Vent Material: None
Gasket Materials 0 None
Head/Connect Orientation 1 High Side Left, Low Side Right(3) / Std Head Orientation
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type B Material: Polyester Powder Coated Aluminum
Connection: M20
Lightning Protection: None
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections B Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 2 Bracket Type: Angle Bracket
Material: 304 SS
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty FX
F1
02		 EN10204 Type 3.1 Material Traceability (FC33341)
Calibration Test Report & Certificate of Conformance (F3399)
Extended Warranty Additional 2 years 
Factory 0000 Factory Identification

  1. Reference head available with Dual Head Gage models only. In-Line Gage models are supplied with Process Head only. 
  2. STG830,840,870 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS 
  3. Left side/Right side as viewed from the customer connection perspective
  4. NAMUR Output Limits are configurable by customer 


  • Estimated Lead Time: 12 - 16
  • Shipping Weight: 10 Kg

Your Can Likes