1746-P1 New Allen Bradley Power Supply SLC 500 Series [1746-P1] - $207.00 : Servo Amplifier, Servo Motor, Transmitter, CompactLogix, Powerflex

Product Description

Part Number: 1746-P1

Technical Specifications

Line voltage: 85...132/170...250V ac; 47...63 Hz
Typical line power requirement: 135VA
Inrush current, max: 20 A
Internal current capacity: 2 A at 5V dc; 0.46 A at 24V dc
Fuse protection⁽¹⁾: 1746-F1 or equivalent⁽²⁾⁽³⁾
24V dc user-power current capacity: 200 mA
24V dc user-power voltage range: 18...30V dc
User-supplied overcurrent protection⁽⁴⁾, max: 15 A
Temperature, ambient operating:
0...60 ?C (32...140 ?F)
Current capacity is derated 5% above 55 ?C (131 ?F)
Isolation⁽⁵⁾: 1800V ac RMS for 1 s
CPU hold-up time⁽⁶⁾: 20 ms (full load) 3000 ms (no load)
Certification (when product is marked):
UL Listed Industrial Control Equipment for Class 1, Division 2, Groups A, B, C, D Hazardous Locations
C-UL Listed Industrial Control Equipment for Class 1, Division 2, Groups A, B, C, D Hazardous Locations
CE⁽⁷⁾European Union 89/336/EEC EMC Directive, compliant with:
EN 50082-2 Industrial Immunity
EN50081-2 Industrial Emissions
European Union 73/23/EEC LVD Directive, compliant with:
EN61131-2 Programmable Controllers
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS 2064 Industrial Emissions

The combination of all output power (5V backplane, 24V backplane, and 24V user source) cannot exceed 70 W.
Fuse sizes specified are for end-devices only. Fuse size may need to be reduced depending on the size of circuit wiring.
Equivalent fuses: 250V-3A fuse, nagasawa ULCS-61ML-3, or BUSSMAN AGC 3.
Use time-delay type overcurrent protection in all ungrounded conductors.
Isolation is between input terminals and backplane.
CPU hold-up time is for 0V unless specified. Hold-up time is dependent on power supply loading.
See the Product Certification link at http://ab.com for Declarations of Conformity, Certificates, and other certification details.